How to Perform a Factory Reset Procedures on BigSky, TimeLine and Mobius

There are two reset procedures available for BigSky, Mobius, and TimeLine.  There is a FACTORY PRESET RESET and a GLOBAL SETTINGS  reset.

FACTORY PRESET RESET

Performing a factory preset reset will erase all custom presets you have saved in your BigSky, TimeLine or Mobius.  We only suggest you do this in the event you’d like to take your entire pedal’s presets back to the factory settings.

1. Power the BigSky, Mobius, or TimeLine on while pressing and holding the A and TAP footswitches (A and C for BigSky) at the same time.
2. The display will show REINIT, then, COMPLT when finished.  It will remain in this state as long as it is powered.
3. Remove power from the pedal, then, re-connect the power to start using it again.

GLOBAL SETTINGS RESET

Performing a Global Settings reset will change all the parameters in the GLOBLS menu back to factory settings.

1. Power the BigSky, Mobius, or TimeLine on while pressing and holding down the TYPE encoder button.
2. The display will show REINIT, then, R CPLT when finished.  It will remain in this state as long as it is powered.
3. Remove power from the pedal, then, re-connect the power to start using it again.