How do I set up Brig to work with MultiSwitch Plus?

To configure your Brig and MultiSwitch Plus to work with each other:

Press and hold the Brig footswitch while connecting power to the pedal. Hold for at least 2 seconds, until the LED stops blinking.
Turn the MIX knob all the way clockwise to set the EXP/ MIDI jack to MIDI MODE. The LED should be BLUE.
Turn the FILTER knob to select either of the following MIDI OUT options:
- Send MIDI CC and Other Data: GREEN
- Send Other Data: AMBER
Press the Brig footswitch to exit and store the MIDI OUTPUT setting, and the EXP/MIDI Jack Mode.
Connect a TRS cable to Brig’s EXP/MIDI jack.

There are two separate modes of operation for MultiSwitch Plus and Brig- Preset Mode, and Tap-Fav-Infinite Mode.

PRESET Mode: Press and hold the A footswitch on MultiSwitch Plus while connecting the other end of the TRS cable to any one of the three jacks.
TAP-FAV-INFINITE Mode: Press and hold the B footswitch on MultiSwitch Plus while connecting the other end of the TRS cable to any one of the three jacks.

To save a preset on Brig with MultiSwitch Plus:

Dial in the sound that you would like to save as your preset on Brig.
Press and hold the Brig footswitch for at least 3 seconds, until the LED blinks BLUE.
Press the A, B, or C MultiSwitch Plus footswitch to save the current state of the pedal to the desired location.

To select a preset on Brig with MultiSwitch Plus: