How do I set up my Deco to work with MultiSwitch Plus?

To configure Deco and MultiSwitch Plus to work with each other:

• Press and hold the TAPE SATURATION ON footswitch while connecting power to the pedal. Hold until both LEDs stop blinking.

• Turn the SATURATION knob all the way counter-clockwise to set the MIDI channel to Channel 1. The DOUBLETRACKER ON LED should be GREEN.

• Turn the TONE knob to select any of the following MIDI OUT options. Both ON LEDs light to indicate your selection:
  • Send MIDI CC, PC, and Other Data: WHITE
  • Send MIDI CC and Other Data: GREEN
  • Send MIDI PC and Other Data: PURPLE
  • Send Other Data: AMBER

• Turn the LAG TIME knob all the way clockwise to set the EXP/MIDI jack to MIDI mode. The DOUBLETRACKER ON LED should be BLUE.

• Press either footswitch to exit and store the MIDI channel, the MIDI OUT setting, and the EXP/MIDI jack mode.

• Connect a TRS cable to the EXP/MIDI jack on Deco.

• Press and hold the A footswitch on MultiSwitch Plus while connecting the other end of the TRS cable to any one of the three jacks to set it to Preset mode.

To save a preset on Deco with MultiSwitch Plus:

• Dial in the sound that you would like to save as your preset on Deco.

• Press and hold both footswitches on Deco until both the LEDs blink GREEN.

• Press the A, B, or C footswitch on MultiSwitch Plus to save the current state of the pedal to the desired location.