What type of signals work with Magneto’s CV inputs?

The following inputs are designed to receive continuous CV input of -5V to +5V.:

• SPEED – Controls the tape speed. (-3V to +3V, calibrated for 1V/octave)
• WET – Modifies the WET level.
• REPEATS – Modifies the REPEATS level.
• SPRING – Modifies the SPRING reverb level.

NOTE: The knob corresponding to the continuous CV inputs acts as an offset that is mixed with the CV input.

The following inputs are designed to receive 0-5V rising edge trigger CV input.

• CLK IN – Sets the delay time in quarter notes.  Clock period range: 50ms to 15s.
• REC GATE – Toggles the record head on and off.  REC LVL LED is lit blue when input signal to the delay line is muted.
• SHIFT – Toggles the SHIFT effect for the Playback heads on and off.
• INFINITE (∞) – Toggles the INFINITE transport control on and off.
• FORWARD/REVERSE – Toggles the FORWARD/REVERSE transport function.
• RESTART – Engages the RESTART transport function.
• PAUSE – Toggles the PAUSE transport function.
• TAP – Controls the function of the physical TAP button.  Sets delay time in ECHO mode.  Sets splice in/out/clear in LOOP mode. Sets sample record start/stop/clear in SAMPLE mode.